Avaya 580 Manuale Utente
5-20
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 5
Viewing Configured Community Strings
To view the currently configured community strings, use the following CLI
command:
command:
#
show snmp community [<community-string>]
Setting the Trap Receiver
To set the trap receiver for a community string, use the following CLI
command:
command:
(configure)#
snmp-server notify <ip-addr> <community-string>
provides an explanation of the command variables.
Deleting a Community String
Switch Community
String
String
To delete a community string for the switch, use the following CLI
command:
command:
(configure)#
no snmp-server community <community-string>
[<ip-address>]
provides an explanation of the command variables.
ro
Assigns read-only access to the community string.
rw
Assigns read-write access to the community string.
[<ip-addr>]
The IP address from which the community string is
valid.
valid.
Table 5-9. snmp-server community
Field
Definition
2 of 2
Table 5-10. snmp-server notify Command
Parameter
Definition
<ip-addr>
The IP address to which you want trap messages sent.
<community-string>
The existing community string for which you are
setting the trap receiver.
setting the trap receiver.