Avaya M770 Manuale Utente
Chapter 5
Managing Physical Ports
48
Avaya M770 ATM Switch User’s Guide
Displaying PLCP counter information for DS3 physical ports
You can view PLCP (Physical Layer Convergence Protocol) counter information for
physical ports on DS3 modules that have their mapping mode set to PLCP. To view
PLCP counter information use the command:
physical ports on DS3 modules that have their mapping mode set to PLCP. To view
PLCP counter information use the command:
pport show plcpcounters
.
Note:
The
pport show plcpcounters
command does not display PLCP
counter information for DS3 ports that have their mapping mode set to ADM.
To display DS3 counter information for all DS3 physical ports, enter the
pport
show plcpcounters
command.
The
pport show counters
command displays the information described in
Command:
M4-DS3s8:/>pport show plcpcounters
Output:
Physical port plcp counters
----------------------
Port
ID
BIP
FERR
FEBE
8.1
0
0
0
8.2
0
0
0
8.3
0
0
0
8.4
0
0
0
Table 5.4
Output from the pport show plcpcounters command
Field
Description
BIP
Bit interleaved errors (B1).
FERR
Framing Pattern Octet Errors and Path Overhead Identification
Octet Errors.
Octet Errors.
FEBE
Far End Block Errors.