Avaya 2520-24-POE Manuale Utente
TMA; Reviewed:
SPOC 11/16/2009
SPOC 11/16/2009
Solution & Interoperability Test Lab Application Notes
©2009 Avaya Inc. All Rights Reserved.
8 of 10
ProC2520-24PoE
Connect the Avaya PD to a PoE enabled port on the ProCurve 2520-24-PoE Switch and
verify that the PD powers on successfully. If the PD does not power on, enter the command
show power-over-ethernet <portlist> where <portlist> is the name of the port on the
ProCurve 2520-24-PoE Switch.
show power-over-ethernet <portlist> where <portlist> is the name of the port on the
ProCurve 2520-24-PoE Switch.
Status and Counters - Port Power Status for port 1
Power Enable : Yes
LLDP Detect : disabled
Priority : low Configured Type :
AllocateBy : usage Value : 17 W
Detection Status : Delivering Power Class : 2
Over Current Cnt : 0 MPS Absent Cnt : 0
Power Denied Cnt : 0 Short Cnt : 0
Voltage : 49.4 V Current : 96 mA
Power : 4.7 W
Verify that Avaya 1600/5600/9600 Series IP Telephones have successfully registered to
either Avaya Aura
TM
Communication Manager or Avaya IP Offce
o
For the Avaya 1600/9600 Series IP Telephones check Avaya Aura
TM
Communication Manager
o
For the Avaya 5600 Series IP Telephones check Avaya IP Office.
8. Conclusion
These Application Notes describe the steps for configuring the HP ProCurve 2520-24-PoE
Switch to provide inline PoE to Avaya IP telephones. It was verified that PoE was delivered
successfully to all Avaya PD’s tested.
Switch to provide inline PoE to Avaya IP telephones. It was verified that PoE was delivered
successfully to all Avaya PD’s tested.