LevelOne GSW-2690 Manuale Utente

 

Default SNMP function : Enable 

Default community name for GET: public 

Default community name for SET: private 

Default community name for Trap: public 

Default Set function : Enable 

Default trap host IP address: 0.0.0.0 

Default port number :162 

Trap: 

In the switch, there are four trap hosts supported. Each of them has its 
own community name and IP address; is user-definable. To set up a trap 
host means to create a trap manager by assigning an IP address to host 
the trap message. In other words, the trap host is a network 
management unit with SNMP manager receiving the trap message from 
the managed switch with SNMP agent issuing the trap message. 6 trap 
hosts can prevent the important trap message from losing.  

For each public trap, the switch supports the trap event Cold Start, Warm 
Start, Link Down, Link Up and Authentication Failure Trap. They can be 
enabled or disabled individually. When enabled, the corresponded trap 
will actively send a trap message to the trap host when a trap happens. If 
all public traps are disabled, no public trap message will be sent. As to 
the Enterprise (no. 6) trap is classified as private trap, which are listed in 
the Trap Alarm Configuration function folder. 

Default for all public traps: Enable. 

 

 

         Fig. 3-15 Community and trap host setting