LevelOne GSW-2690 Manuale Utente

Static Setting 

The function of Static is used to configure MAC’s real manners inside of the 
switch. Three kinds of manners including static, static with destination drop 
and static with source drop are contained in this function . 

As “static” is chosen, assign a MAC address to a specific port, all of the 
switch’s traffics sent to this MAC address will be forwarded to this port. 

As “static with destination drop” is chosen, the packet will be dropped if its DA 
is equal to the value you set up. Due to this setting belongs to the global one, 
so, it may affect all ports’ transmission of the packets.  

As “static with source drop” is chosen, the packet will be dropped if its SA is 
equal to the value you set up. Due to this setting belongs to the global one, so, 
it may affect all ports’ transmission of the packets.  

 

 

                 Fig. 3-28

MAC: 

It is a six-byte long Ethernet hardware address and usually expressed by 
hex and separated by hyphens. For example, 

00 – 

11 - 6B - D6 – 00 - 01 

VID: 

VLAN identifier. This will be filled only when tagged VLAN is applied. 
Valid range is 1 ~ 4094.