Bosch 4.5.5 Manuale Utente

Client software, Operator Client software, Video
Streaming Gateway software, Mobile Video
Services software) in all supported languages

– Configuration Manual (PDF format) in all

supported languages (except Arabic)

– Operator’s Manual (PDF format) in all supported

languages (except Arabic)

• Quick Start Manual in English, French, German,

Simplified Chinese and Spanish

Licenses are provided as eLicenses via email.

Maximum number of workstations

simultaneously viewing the same

camera

Multicast: 50

Unicast: 5

Supported GUI languages

English, German, Dutch, Italian,

Portuguese, French, Spanish,

Simplified Chinese, Traditional

Chinese, Russian, Hungarian,

Japanese, Czech, Danish,

Finnish, Greek, Norwegian,

Polish, Swedish, Thai, Turkish,

Korean, and Arabic

Anti-Virus software must not perform a full-scan. Performance may

decrease depending on configuration.

Event reaction time

<1 second, assuming sufficient

network bandwidth

Alarm reaction time (incl. 1 live

Image pane, 1 instant playback

Image pane and 1 map Image

pane):

Maximum 2 seconds, assuming

sufficient network bandwidth

Bandwidth requirements for LAN

Min. 1 Gbps for connections

between:

Operator Client to Management

Server

Operator Client to VRM/DiBos

Management Server to

NVR/VRM/DiBos

Bandwidth requirements for

remote access

>= 300kbps

Hardware transcoder

Hardware transcoder VIP-XTCXF-

INT or VJT-XTCXF must be

configured in VRM, refer to VRM

documentation.

Hardware transcoding only

applicable for VRM connected

BVIP cameras.

For transcoding live streams it is

not required that the respective

camera is recording.

Required open ports

Connection to VRM

LAN: port 1756

WAN: port 80 or port 443 as per

default

Connection to

Video Streaming Gateway

TCP port 8756 (VSG instance 1)

TCP port 8757 (VSG instance 2)

TCP port 8758 (VSG instance 3)

TCP port 8759 (VSG instance 4)

TCP port 8760 (VSG instance 5)

TCP port 8761 (VSG instance 6)

TCP port 8762 (VSG instance 7)

Connection to (Enterprise)

Management Server

TCP ports 5390, 5392, 5393,

5395

Connection to Operator Client

Workstations by Bosch VMS SDK

TCP port (default 5394)

Connection from Management

Server to SMTP (for email

notifications)

TCP port 25

Connection to Bosch encoders

and decoders

Control channel: TCP ports 80

and 1756 (port 443 for encoders

using https)

Network scan: UDP ports 1757

and 1758

Multicast detection: one

selectable UDP port (default

1800)

Multicast video transmission: For

each encoder audio or video

stream, 1 selectable UDP port

Unicast UDP transmission: UDP

ports dynamically assigned in the

range from 1024 to 65000

Connection between Management

Server and DiBos (as of V.8.10,

earlier versions need a patch for

using Web service)

TCP port 808

Connection between Operator

Client and DiBos DVRs (uses

DCOM)

TCP Port 135 plus four TCP ports

and four UDP ports dynamically

assigned in the range from 1025

to 65535

These ports are also used when

Management Server and an old

DiBos 8.9 or earlier without patch

are connected.

Maximum number of sustained

events

For highest performance server:

500 events/s with Logbook

1000 events/s without Logbook

5000 events/s at peaks with

Logbook

Logbook

Supported by SQL Server 2008

R2 (64-bit version)

4 GByte Logbook size

Management Server Redundancy

Available with VMware HA.

Please contact Bosch Design

Engineer for redundancy

solutions.

Maximum number of Task

Schedules

200

4 | Bosch Video Management System v.4.5.5