Belkin F1DP108AEA Guida Utente
20
Installation
Step 4
Connect the SMB CAT5 KVM Switch to the Server Interface Module using the
included Belkin CAT5e Patch Cable or other CAT5 cable. (Refer to diagram
below.) Your server should recognize your Server Interface Module and
automatically install the HID USB driver if necessary.
included Belkin CAT5e Patch Cable or other CAT5 cable. (Refer to diagram
below.) Your server should recognize your Server Interface Module and
automatically install the HID USB driver if necessary.
Step 5
Repeat Steps 1 through 4 for each additional USB server you wish
to connect.
to connect.
NOTE: We recommend you attach the Server Interface Module cable directly to
a free USB port on your server.