Belkin F1DP108AEA Guida Utente

3

1

2

3

4

5

6

7

8

se

ct

io

n

 

3

   Direct-access port selectors, located conveniently on the front panel of the 

SMB CAT5 KVM Switch, allow for simple, manual port-selection.

   The AutoScan feature allows you to set your SMB CAT5 KVM Switch to scan 

and monitor the activities of all connected servers, one by one. The time 
interval allotted for each server can be defined or adjusted through the On-
Screen Display (OSD) menu.

   An LED display on the front panel of the SMB CAT5 KVM Switch serves as a 

status monitor. An LED above each direct-access port selector illuminates to 
indicate that the console currently controls the corresponding server. As a port 
selector is pushed, the LED above it will light up. A flashing port LED indicates 
that there is no server connected to that port.

   When daisy-chaining multiple SMB CAT5 KVM Switches together, the  

seven-segment LED display serves as a quick indicator of the selected BANK.

   Flash-upgradeable firmware allows you to install the latest firmware for your 

SMB CAT5 KVM Switch. This enables your KVM Switch to maintain consistent 
compatibility with the latest devices and servers. Firmware upgrades are 
free for the life of your SMB CAT5 KVM Switch and can be downloaded from 
Belkin’s support website at www.belkin.com/support.