LevelOne POH-0850TX Manuale Utente

 

                                                                               

 

9

 

 

 

Connecting the PoE with PC through the console port. Then, connect the PD (Powered 

Device) to the port of PoE. Run the software utility and select the COM port form Serial 

Link Setup function. You will see the main utility interface as figure 4-1. 

 

Figure 4-1. The GUI management interface 

 

The GUI management is divided into three parts: 

 

System Setup & Control: main system level parameters setup for the POE 

system. 

 

System Information: display hardware version, firmware version, and utility 

version. 

 

Device Setting: you can save the device configuration to system, down load the