ZyXEL Communications XGS-4526 Manuale Utente
Chapter 24 Multicast
XGS-4526/4528F/4728F User’s Guide
237
24.7 General MVR Configuration
Use the MVR screen to create multicast VLANs and select the receiver port(s) and
a source port for each multicast VLAN. Click Advanced Applications >
Multicast > Multicast Setting > MVR link to display the screen as shown next.
a source port for each multicast VLAN. Click Advanced Applications >
Multicast > Multicast Setting > MVR link to display the screen as shown next.
Note: You can create up to five multicast VLANs and up to 256 multicast rules on the
Switch.
Note: Your Switch automatically creates a static VLAN (with the same VID) when you
create a multicast VLAN in this screen.
Figure 104 Advanced Application > Multicast > Multicast Setting > MVR
The following table describes the related labels in this screen.
Table 66 Advanced Application > Multicast > Multicast Setting > MVR
LABEL
DESCRIPTION
Active
Select this check box to enable MVR to allow one single multicast VLAN
to be shared among different subscriber VLANs on the network.
to be shared among different subscriber VLANs on the network.
Name
Enter a descriptive name (up to 32 printable ASCII characters) for
identification purposes.
identification purposes.
Multicast VLAN
ID
ID
Enter the VLAN ID (1 to 4094) of the multicast VLAN.