Lucent Technologies P332MF Manuale Utente
Chapter 4
Installation and Setup
18
Cajun
P332MF
User’s Guide
Note: Use Octaplane cables to interconnect with other switches.
Rack Mounting
The Cajun P330 case fits in most standard 19-inch racks. Cajun P330 is 2U (88mm,
3.5”) high.
3.5”) high.
Place the Cajun P330 in the rack as follows:
1
Snap open the hinged ends of the front panel to reveal the fixing holes.
2
Insert the unit into the rack. Ensure that the four Cajun P330 screw holes are
aligned with the rack hole positions as shown in Figure 4.1.
aligned with the rack hole positions as shown in Figure 4.1.
Figure 4.1
Cajun P330 Rack Mounting
3
Secure the unit in the rack using the screws. Use two screws on each side. Do
not overtighten the screws.
not overtighten the screws.
4
Snap closed the hinged ends of the front panel.
5
Ensure that ventilation holes are not obstructed.