Lucent Technologies P332MF Manuale Utente
Chapter 6
Cajun Campus CLI – Layer 2
Cajun P332MF User’s Guide
45
Show port Command
Use the
show port command to display port status.
The syntax for this command is:
show port [<mod_num>[/<port_num>]]
show port [<mod_num>[/<port_num>]]
Example:
To display the status for port 4 on module 3:
Cajun_P330-N> show port 3/4
Cajun_P330-N> show port 3/4
Port Name Status Vlan Level Neg Dup. Spd. Type
------ --------------- --------- ---- ------ ------- ---- ---- -------------
3/4 John connected 1 normal enable half 10M 10/100Base-Tx
------ --------------- --------- ---- ------ ------- ---- ---- -------------
3/4 John connected 1 normal enable half 10M 10/100Base-Tx
Show Port Output Fields
mod_num
(Optional) Number of the module. If you do not specify a
number, the ports on all modules are shown.
number, the ports on all modules are shown.
port_num
(Optional) Number of the port on the module. If you do not
specify a number, all the ports on the module are shown.
You can also specify a range of ports separated by a dash, e.g.
5-13 for ports 5 to 13.
specify a number, all the ports on the module are shown.
You can also specify a range of ports separated by a dash, e.g.
5-13 for ports 5 to 13.
Field
Description
Port
Module and port number
Name
The name you assigned to the port
Status
Status of the port (connected, faulty, disabled)
VLAN
VLAN ID of the port
Level
Priority level of the port (normal or high)
Neg
The autonegotiation status of the port (enable, disable)
Duplex
Duplex setting for the port (fdx, hdx)
Speed
Speed setting for the port (10, 100).
Type
Port type, for example, 10BaseT, 10BaseFL, 100BaseTX,
100BaseFX MM, 100BaseFX SM, 10/100BaseTX
100BaseFX MM, 100BaseFX SM, 10/100BaseTX