Lucent Technologies P332MF Manuale Utente

Chapter 6

Cajun Campus CLI – Layer 2

Cajun P332MF User’s Guide

51

Following are the

 show trunk command output fields: 

Use the

 show spantree command to display spanning-tree information. 

The syntax for this command is:
show spantree [<mod_num>[/<port_num>]]

Example:

Cajun_P330-N> show spantree
Spanning tree enabled

Designated Root:  00-40-0d-88-06-c8
Designated Root Priority: 32768
Designated Root Cost: 20
Designated Root Port: 1/1
Root Max Age: 20   Hello Time: 2

Bridge ID MAC ADDR: 00-40-0d-92-04-b4
Bridge ID priority: 32768

Port   State         Cost       Priority
------ ------------- ---------- ------------
1 /1   Forwarding    20         128
1 /2   not-connected 20         128
1 /3   LAG-member    20         128
1 /4   LAG-member    20         128
1 /5   not-connected 20         128

 Port

Module and port number(s)

 Mode

Tag status of the port (ON - dot1Q tagging mode, 
OFF - clear mode).

 Native VLAN

Number of the Port VLAN ID (the VLAN to which 
received untagged traffic will be assigned). If the Port is in 
“clear mode” only frames of this VLAN will be 
transmitted.

VLANs allowed on trunk

Range of values allowed for the Native VLAN (1 to 3071)