Lucent Technologies P332MF Manuale Utente
Chapter 6
Cajun Campus CLI – Layer 2
Cajun P332MF User’s Guide
67
Set Commands Summary Table
Following is a Table of the Privileged Level
set commands.
• set logout
Set the number of minutes before an
inactive CLI session automatically logs
out
inactive CLI session automatically logs
out
Page 69
• set timezone
Set the timezone for the system
Page 70
• set ntp server
Set the NTP server address
Page 70
• set ip route
Add IP addresses to the IP routing table
Page 70
• set snmp trap
Set the SNMP trap of the system or add/
delete an entry into/from the SNMP
trap receiver table
delete an entry into/from the SNMP
trap receiver table
Page 71
• set snmp trap auth
Enable/Disable the SNMP
authentication trap
authentication trap
Page 72
• set snmp retries
Set the number of SNMP retries
Page 72
• set snmp timeout
Set the SNMP timeout
Page 73
• set system
location
Set the system location
Page 73
• set system name
Set the system name
Page 73
• set system contact
Set the system contact person
Page 73
• set interface
Configure the management interface of
the device
the device
Page 74
• set port level
Set the priority level of a port
Page 74
• set port
negotiation
Set the autonegotiation mode of a port
Page 75
• set port enable
Administratively enable a port
Page 75
• set port disable
Administratively disable a port
Page 75
• set port speed
Set the speed for a 10/100 port
Page 76
• set port duplex
Set the duplex mode of a port
Page 76
• set port name
Assign a name to a port
Page 76
• set port trap
Enable/Disable the SNMP up/down link
traps sent for port
traps sent for port
Page 77