Microsoft ES4649 Manuale Utente
Command Line Interface
4-140
4
Example
This example adds two domain-name servers to the list and then displays the list.
This example adds two domain-name servers to the list and then displays the list.
Related Commands
ip domain-lookup
This command enables DNS host name-to-address translation. Use the no form to
disable DNS.
disable DNS.
Syntax
[no] ip domain-lookup
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• At least one name server must be specified before you can enable DNS.
• If all name servers are deleted, DNS will automatically be disabled.
• If all name servers are deleted, DNS will automatically be disabled.
Example
This example enables DNS and then displays the configuration.
This example enables DNS and then displays the configuration.
Console(config)#ip domain-server 192.168.1.55 10.1.0.55
Console(config)#end
Console#show dns
Domain Lookup Status:
Console(config)#end
Console#show dns
Domain Lookup Status:
DNS disabled
Default Domain Name:
.sample.com
Domain Name List:
.sample.com.jp
.sample.com.uk
.sample.com.uk
Name Server List:
192.168.1.55
10.1.0.55
10.1.0.55
Console#
Console(config)#ip domain-lookup
Console(config)#end
Console#show dns
Domain Lookup Status:
Console(config)#end
Console#show dns
Domain Lookup Status:
DNS enabled
Default Domain Name:
.sample.com
Domain Name List:
.sample.com.jp
.sample.com.uk
.sample.com.uk
Name Server List:
192.168.1.55
10.1.0.55
10.1.0.55