Motorola CPCI-6115 Manuale Utente
CPCI-6115 CompactPCI Single Board Computer Installation and Use (6806800A68D)
Hardware Preparation and Installation
Environmental, Power, and Thermal Requirements
30
Shipment Inspection
To inspect the shipment, perform the following steps:
1. Verify that you have received all items of your shipment.
2. Check for damage and report any damage or differences to customer service.
3. Remove the desiccant bag shipped together with the board and dispose of it
according to your country’s legislation.
2.3
Environmental, Power, and Thermal
Requirements
Requirements
The next sections describe the environmental, power, and thermal requirements for the CPCI-
6115.
6115.
2.3.1
Environmental Requirements
The following table lists the currently available specifications for the environmental and
mechanical characteristics of the CPCI-6115. A complete functional description of the CPCI-
6115 baseboard appears in
mechanical characteristics of the CPCI-6115. A complete functional description of the CPCI-
6115 baseboard appears in
. Specifications for the optional
PCI mezzanines can be found in the documentation for those modules.
You must make sure that the board, when operated in your particular system configuration,
meets the environmental requirements specified below.
meets the environmental requirements specified below.
The product is thoroughly inspected before shipment. If any damage occurred during
transportation or any items are missing, contact customer service immediately.
transportation or any items are missing, contact customer service immediately.
Operating temperatures refer to the temperature of the air circulating around the board
and not to the component temperature.
and not to the component temperature.
Table 2-1 CPCI-6115 Specifications
Characteristics
Specifications
PMC I/O Signal Impedance
42 to 75 ohms (nominal impedance)
Operating temperature
0°C to +55°C (32°F to 131°F) entry air with forced-air cooling