American Power Conversion AP9615 Manuale Utente

11

To remove the 5 Port 10Base-T Hub, perform the following 
steps in the order given. 

1 Disconnect all cables from the hub. 

2 Turn off the UPS or device that houses the hub. (For 

3 Use  a 

#2

 Phillips head screwdriver to remove the 2 

screws fastening the hub to the 

UPS

 or triple chassis. 

Keep the screws for Step 6 below.

4 Carefully grasp the sides of the hub’s front panel and 

gently pull the hub from the SmartSlot.

5 Place the hub into its original packaging or other 

static-safe material.

6 Replace the SmartSlot coverplate (removed during 

installation of the hub) with the screws removed in 
Step 3.