Allied Telesis AT-FS709FC Manuale Utente
18
Installing the Switch
You can install the switch on a table or in a 19-inch rack. To install the switch,
perform the following procedure:
perform the following procedure:
1.
Remove all components from the shipping package and store the
packaging material in a safe location.
packaging material in a safe location.
Note
You should use the original packaging material if, for any reason, you
need to return the unit to Allied Telesyn International.
You should use the original packaging material if, for any reason, you
need to return the unit to Allied Telesyn International.
2.
Locate a level, secure surface for the switch.
3.
To mount the switch in a rack, do the following:
a.
Affix one of the rack-mounting brackets to the side of the switch, as
shown in Figure 6.
shown in Figure 6.
Figure 6 Installing a Rack-mounting Bracket
b.
Install the second bracket on the other side of the switch.
c.
Install the switch in a 19-inch rack. (Screws for mounting the switch
in the rack are not provided.)
in the rack are not provided.)