Allied Telesis AT-IFS802SPOE Manuale Utente

28

AT-IFS802SP/POE(W)-80 User Manual

The switch is a network device which needs to be assigned an IP address for being identified on the
network. Users have to decide a means of assigning IP address to the switch.

: Enable or disable the DHCP client function. When DHCP client function is enabled, 

the switch will be assigned an IP address from the network DHCP server. The default IP address 
will be replaced by the assigned IP address on DHCP server. After the user clicks Apply, a popup 
dialog shows up to inform the user that when the DHCP client is enabled, the current IP will lose 
and user should find the new IP on the DHCP server.
IP Address

: Assign the IP address that the network is using. If DHCP client function is enabled, 

this switch is configured as a DHCP client. The network DHCP server will assign the IP address to
the switch and display it in this column. The default IP is 192.168.16.1 or the user has to assign an 
IP address manually when DHCP Client is disabled.
Subnet Mask

: Assign the subnet mask to the IP address. If DHCP client function is disabled, the 

user has to assign the subnet mask in this column field.
Gateway

: Assign the network gateway for the switch. If DHCP client function is disabled, the user 

has to assign the gateway in this column field. The default gateway is 192.168.16.254.
DNS1

: Assign the primary DNS IP address.

: Assign the secondary DNS IP address.

And then, click

•

Apply

IP configuration interface