Allied Telesis AT-IFS802SPOE Manuale Utente

32

AT-IFS802SP/POE(W)-80 User Manual

Backup Configuration interface

You can back up the current configuration from flash ROM to the TFTP server for the purpose of
recovering the configuration later. It helps you to avoid wasting time on configuring the settings by
backing up the configuration.

: Type in the TFTP server IP.

: Type in the file name.

Click

•

Apply

This page allows the user to decide whether to send the system event log, and select the mode which 
the system event log will be sent to client only, server only, or both client and server. What kind of 
event log will be issued to the client/server depends on the selection on the 

Event Configuration 

tab. There  are  five  types  of  event—Device  Cold  Start,  Device Warm  Start, Authentication  Failure,
X-Ring Topology Change, and Port Event—available to be issued as the event log.

: Select the system log mode—Client Only, Server Only, or Both. ‘Client

Only’ means the system event log will only be sent to this interface of the switch, but on the other 
hand ‘Server Only’ means the system log will only be sent to the remote system log server with
its IP assigned. If the mode is set in ‘Both’, the system event log will be sent to the remote server
and this interface.
System Log Server IP Address

: When the ‘Syslog Mode’ item is set as Server Only/Both, the

user has to assign the system log server IP address to which the log will be sent.
Click            to refresh the event log displaying area.

•

Click            to clear all the current event logs.

•

Make sure the selected mode is correct, and click            to have the setting take effect.

•

Reload

Clear

Apply