Allied Telesis AT-IFS802SPOE Manuale Utente
49
AT-IFS802SP/POE(W)-80 User Manual
6.17 Rate Limiting
You can set up every port’s bandwidth rate and frame limitation type.
Ingress Limit Frame type
•
: select the frame type that wants to filter. There are four frame types
for selecting:
All
Broadcast/Multicast/Flooded Unicast
Broadcast/Multicast
Broadcast only
Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Broadcast only types
are only for ingress frames. The egress rate only supports
Broadcast/Multicast/Flooded Unicast
Broadcast/Multicast
Broadcast only
Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Broadcast only types
are only for ingress frames. The egress rate only supports
All type.
>
>
>
>
>
>
>
Rate Limiting interface
All the ports support port ingress and egress rate control. For example, assume port 1 is 10Mbps,
•
users can set it’s effective egress rate is 1Mbps, ingress rate is 500Kbps. The switch performs the
ingress rate by packet counter to meet the specified rate
ingress rate by packet counter to meet the specified rate
Ingress: Enter the port effective ingress rate (The default value is “0”).
Egress: Enter the port effective egress rate (The default value is “0”).
Egress: Enter the port effective egress rate (The default value is “0”).
And then, click to apply the settings
•
>
>
>
Apply