Acer G700 series Manuale Utente
67
Super I/O Configuration
The Super I/O Configuration submenu lets you define the parameter
settings for the system’s parallel and serial ports.
settings for the system’s parallel and serial ports.
Parameter
Description
Serial Port 1
(Address/IRQ)
(Address/IRQ)
Serial port 1 address and IRQ (interrupt request) setting
Parallel Port
Address
Address
Sets a logical base address for the parallel port
Parallel Port
IRQ
IRQ
Assigns an IRQ for the parallel port.
If you install an add-on card that has a parallel port
whose address conflicts with the onboard parallel port, a
warning appears on the screen. Check the parallel port
address of the add-on card and change the address to
one that does not conflict.
whose address conflicts with the onboard parallel port, a
warning appears on the screen. Check the parallel port
address of the add-on card and change the address to
one that does not conflict.
Parallel Port
Mode
Mode
Sets the operation mode for the parallel port
ECP Mode DMA
Channel
Channel
Assigns a DMA (Direct Memory Access) channel for the
ECP (Extended Capabilities Port) parallel port function.
This parameter is configurable only if you select ECP as
the operation mode.
ECP (Extended Capabilities Port) parallel port function.
This parameter is configurable only if you select ECP as
the operation mode.
AA G701 - EN.book Page 67 Tuesday, February 25, 2003 5:19 PM