Lightwave Communications 3200 Manuale Utente

Firmly seat the adapter in the serial port. Screw down the adapter to secure it to
the serial port.

Insert one end of the serial cable into the adapter until a click is heard. Insert the
other end of the serial cable into port "A" of the control card, again until a click is
heard.

Fig. 2 Control Card Layout with DIP Switch Settings.

6. Press

<ENTER>

on the keyboard. The LCI3200>> prompt should appear. If

not, check that the ConsoleServer 3200 is connected to the appropriate power
outlet, the power switch is on, the control card is firmly seated, and that all cable
connections are secure. If "garbage" characters appear on the screen, check
that the communications settings are correct.

The system administrator may now login (as outlined in Section 6.0, System
Administrator) into port "A" of the control card.

The system administrator may not access attached devices. To access attached
devices, a user profile must be created (see section 6.2), and the user must log in
through one of the user access cards (see section 3.3).

105

ROCKER DOWN

IGH

TWA

ION

, I

ASSEMBL

Y 0

00.

USA

ROCKER DOWN

DEFAULT DIP SWITCH SETTINGS