Lightwave Communications 3200 Manuale Utente

sys admin>>terminal 1

Enter accepts present value
T1: 0=9600, 1=19200, 2=38400, 3=57600 | BAUD RATE: 9600>
T1: 0=1, 1=2                  | STOP BITS: 1>
T1: 0=None, 1=Odd, 2=Even         | PARITY: None>
T1: 0=8, 1=7, 2=6               | DATA BITS: 8>
T1: 0=DCE, 1=DTE               | EQUIP PORT TYPE: DCE>
T1: 0=XON/OFF, 2=RTS/CTS          | FLOW CONTROL: XON/XOFF>
Card installed, settings updated

sys admin>>

Device port location reference and device name template:

A list of device port names and their corresponding port number may be displayed by
using the LISTDEVICES command.

6.4

Terminals

Terminals Command

The sys admin defines terminal port parameters using the TERMINALS command in a
manner similar to the DEVICES command. If the command is entered by itself, the
terminal settings will display. If the terminal port number is specified after the
command, then the settings for that terminal port may be altered. Programmable
elements include: device name, baud rate, stop bits, parity, data bits, DCE/DTE, and
flow control as in the example below.