Inter-Tel CS-5200 Manuale Utente

Page  198

Transfer-to-Connect Endpoint Flag

If the Transfer-To-Connect Allowed endpoint flag is enabled, an announced transfer call
(including an announced transfer from Voice Mail) connects immediately with the destination
once the transferring party hangs up. (If the flag is disabled, the recipient must press a Call but-
ton or the 

 button to answer the transferred call). If the user has a headset enabled, or

if the user picks up the handset for the initial call and the transferring party disconnects, the
transferred party hears a single tone and then is immediately connected without any further
action from the user. Calls will not automatically connect in handsfree speakerphone mode.
This flag applies only to Inter-Tel endpoints and is disabled in the default state. 

  1.

Inter-Tel endpoints: While on a call, press the 

 button, or press the Special

button and enter the Transfer to Ring feature code (345). Intercom dial tone is heard.
The display shows TRANSFER CALL TO EXTENSION.

Single line endpoints: While on a call, hookflash. Tones are heard, followed by inter-
com dial tone.

  2.

EITHER, Select an outgoing trunk group or press the OUTSIDE PHONE menu button,
and dial the desired phone number. If all trunks in the trunk group are busy, select
another trunk group or camp on and wait for a trunk. If you hear repeating reorder
tones, you dialed a restricted phone number. To return to the caller on transfer hold,
press the lit Call button, trunk button, or 

 button (Inter-Tel endpoint) or hook-

flash twice (single line endpoint).

OR, Dial the desired extension number or press a Speed Dial button, the 

menu button, or the 

 menu button. Model 8660 or 8662 users can

use the Directory feature by pressing the 

 menu button. The number

can be an endpoint extension number, 

 for the Attendant, a hunt group pilot number,

or a Voice Mail extension number.

a.

Transfer to an endpoint that is forwarded to Voice Mail: You hear repeating
double tones and the display shows DEST FORWARDED TO VOICE MAIL.

b.

Transfer to Voice Mail: The system waits for you to enter the mailbox number.
The display shows ENTER MAILBOX. Enter the desired mailbox number. Users
of Executive and Professional Display phones and Model 8560 phones can access
the Directory feature by pressing the IC DIRECTORY menu button, if the system
is validating mailbox numbers.

 

hang up, the caller is connected to the Voice Mail unit and must enter the mailbox
number after listening to the introductory voice prompts.

  3.

If desired, wait for an answer and announce the call. If you are calling an endpoint such
as Automated Attendant that does not accept call announcements, the display shows
HANG UP TO FINISH TRANSFER.

  4.

You have the following options:

To complete the transfer: Hang up or press another Call button. The display shows
CALL TRANSFERRED TO <user name>.

To return to the caller: Press the fluttering Call button, trunk button, or 

 but-

ton (Inter-Tel endpoint) or hookflash twice (single line phone).

To try another endpoint: Press the 

 button or press the Special button and

enter the Transfer to Ring feature code (345). Then dial another extension number.