Inter-Tel CS-5200 Manuale Utente

Station Programming

Page 29

b.

Endpoint Information:  This option allows you to select an Attendant for the end-
point or program the endpoint’s username. To select it, press 

 or the 

 menu button. The display shows ENTER ENDPOINT INFO OPTION. Select

one of the following:

1.) Attendant:  To assign an Attendant to serve this endpoint, press 

 or the

 menu button. The display shows ENTER ATTENDANT

EXTENSION. Enter the desired extension number. When the circuit informa-
tion is displayed, press 

 again to return to the ENTER ENDPOINT INFO

OPTION prompt. The display shows DATABASE UPDATED. (Or, to cancel
your entry, press 

 or 

. The display shows NO UPDATE PER-

FORMED.)

2.) Username:  To change the username of the endpoint, press 

 or the 

 menu button. The display shows ENTER USERNAME. Enter the new

name as described on 

. (Or, to cancel your entry, press 

 or 

. The display shows NO UPDATE PERFORMED.)

c.

Toll Restriction: This option allows you to set the endpoint class of service for day
and/or night modes. To select it, press 

 or the 

menu but-

ton. Then do the following:

1.) The display shows TOLL RESTRICTION OPTION. Press 

 or the 

  menu button to program day mode toll restriction. Or, press 

 or the

 menu button to program night mode toll restriction.

2.) The display shows SET DAY (or NIGHT) COS XX. If this is not the COS

you want to program, scroll to the correct COS by pressing the high end of
the Volume button or 

 to scroll forward, or press the low end of the Vol-

ume button or 

 to scroll backward. For more information about

COS, refer to 

The default COS numbers are provided in Table . 

3.) When the correct COS is displayed, press 

 or the ON menu button to

enable the toll restriction. Or, press 

 or the 

 menu button to disable it.

4.) If desired, repeat preceding 

 to program additional COS toll

restrictions.

5.) Press  

or 

 to save the COS programming. The display shows

DATABASE UPDATED and then returns to the TOLL RESTRICTION
OPTION prompt.

6.) Press 

 again to exit to the ENTER ENDPOINT OPTION prompt.

  6.

When the display shows ENTER ENDPOINT OPTION, press 

 again to exit to the

ENTER ENDPOINT EXTENSION prompt. You can then program another endpoint by
repeating these steps or press 

 or 

 once more to exit to the ENTER DATA-

BASE OPTION prompt.

  7.

When finished with all programming, press 

 while the ENTER DATABASE

OPTION prompt is displayed. This ends the programming session.

COS 02 – Deny Area/Office

COS 06 – Deny Equal Access

COS 03 – Deny Operator

COS 07 – Deny Local Calls

COS 04 – Deny Toll Access

COS 08 – Denied Numbers

COS 05 – Deny International

COS 09 – Allowed Numbers