Inter-Tel CS-5200 Manuale Utente

Trunk Programming

Page 41

Ring-In For Day Or Night Mode: To program the endpoint that will have ring in
for this trunk group for day mode, press 

 or the 

 menu button. To

program for night mode, press 

 or the 

 menu button. When the

display shows ENTER ENDPOINT EXTENSION, enter endpoints into the list one
at a time as described above for Answer Access.

Toll Restriction: To program the toll restrictions for the trunk group, press 

 or

the 

 menu button. When the display shows TOLL RESTRIC-

TION OPTION, press the numbers that correspond to the toll restrictions you want
to program, as follows:

1.) COS for day or night mode: To program the toll restriction class of service

for day mode, press 

 or the 

menu button. To program class of

service for night mode, press 

 or the 

 menu button. The display

shows SET DAY (or NIGHT) COS XX. If this is not the COS you want to
program, scroll to the correct COS by pressing the high end of the Volume
button or the 

 menu button to scroll forward, or press the low end of the

Volume button or the 

 menu button to scroll backward. The default

COS numbers are listed below. For definitions, refer to “Class of Service” on

. COS 01 is not used for trunks. When the correct COS is displayed,

press 

 or the 

 menu button to enable the toll restriction. Or, press 

 or

the 

 menu button to disable it. If desired, repeat this step to program addi-

tional COS toll restrictions. Then press 

 or 

 to continue.

2.) Exempt from ARS: To program the Exempt from ARS option, press 

 or

the 

 button. When the display shows EXEMPT FROM

ARS, press 

 or the 

 menu button to enable the option. Or, press 

 or

the NO menu button to disable it. Then press 

 or 

 to continue.

3.) Subject to toll restriction: To program the trunk group Subject to Toll Restric-

tion option, press 

 or the 

 menu button. When the dis-

play shows SUBJECT TO TOLL, press 

 or the YES menu button to enable

the option. Or, press 

 or the NO menu button to disable it. Then press 

or ACCEPT to continue.

Trunk List: To program the list of trunks for the trunk group, press 

 or the

 menu button. When the display shows ENTER TRUNK EXTEN-

SION, enter trunks into the list as follows:

1.) Enter a trunk extension using one of the methods described on 

2.) The display shows the extension number and a Yes/No prompt. Press 

 or

the 

 menu button, followed by 

, to include the trunk in the list. Or,

press 

 or the 

 menu button, followed by 

, to exclude the trunk from

the list.

3.) When the display returns to ENTER TRUNK EXTENSION, select another

extension number. Or, if finished programming the trunk list, press 

 or

 to continue.

c.

To exit, press 

 or 

 to move backward through the prompts until you

reach the ENTER DATABASE OPTION prompt.

  6.

When finished with all programming, press 

 while the ENTER DATABASE

OPTION prompt is displayed. This ends the programming session.

COS 02 – Deny Area/Office

COS 06 – Deny Equal Access

COS 03 – Deny Operator

COS 07 – Deny Local Calls

COS 04 – Deny Toll Access

COS 08 – Denied Numbers

COS 05 – Deny International

COS 09 – Allowed Numbers