Intel SE8500HW4 Manuale Utente

May 2005 

1.0 

Initial release. 

 

Information in this document is provided in connection with Intel

®

 products. No license, express 

or implied, by estoppel or otherwise, to any intellectual property rights is granted by this 
document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel 
assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to 
sale and/or use of Intel products including liability or warranties relating to fitness for a particular 
purpose, merchantability, or infringement of any patent, copyright or other intellectual property 
right. Intel products are not intended for use in medical, life saving, or life sustaining 
applications. Intel may make changes to specifications and product descriptions at any time, 
without notice. 

Designers must not rely on the absence or characteristics of any features or instructions marked 
"reserved" or "undefined." Intel reserves these for future definition and shall have no 
responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. 

This document contains information on products in the design phase of development. Do not 
finalize a design with this information. Revised information will be published when the product is 
available. Verify with your local sales office that you have the latest datasheet before finalizing a 
design. 

The Intel® Server Board Set SE8500HW4 may contain design defects or errors known as errata 
which may cause the product to deviate from published specifications. Current characterized 
errata are available on request. 

Intel Corporation server baseboards contain a number of high-density VLSI and power delivery 
components that need adequate airflow to cool. Intel’s own chassis are designed and tested to 
meet the intended thermal requirements of these components when the fully integrated system 
is used together. It is the responsibility of the system integrator that chooses not to use Intel 
developed server building blocks to consult vendor datasheets and operating parameters to 
determine the amount of air flow required for their specific application and environmental 
conditions. Intel Corporation can not be held responsible if components fail or the Server Board 
does not operate correctly when used outside any of their published operating or non-operating 
limits. 

Intel, Xeon and XScale are trademarks or registered trademarks of Intel Corporation. 

*Other brands and names may be claimed as the property of others. 

Copyright © Intel Corporation 2005.