Gateway 920 Manuale Utente

Chapter 2: Setting Up Your Server

www.gateway.com

To make sure that your working environment is safe:

■

Use a clean, dry, flat, stable surface for your server. Allow at least 6 inches 
at the rear of the server for cabling and air circulation.

■

Use the instructions on your server’s setup poster to set up your hardware.

■

Use an uninterruptable power supply (UPS) with surge protection for 
protection from power outages and power spikes.

■

Avoid subjecting your server to extreme temperature changes. Do not 
expose your server to direct sunlight, heating ducts, or other 
heat-generating objects. Damage caused by extreme temperatures is not 
covered by your warranty. As a general rule, your server is safest at 
temperatures that are comfortable for you.

■

Keep your server and magnetic media away from equipment that generates 
magnetic fields, such as unshielded stereo speakers. Strong magnetic fields 
can erase data on both diskettes and hard drives. Even a telephone placed 
too close to the server may cause interference.

Your server comes with a 3-wire AC power cord fitted with 
the correct plug style for your region. If this plug does not 
match the connector on your UPS or wall outlet, do not 
attempt to modify the plug in any way. Use a UPS or wall 
outlet that is appropriate for the supplied AC power cord.

Keep the server boxes and packing material in case you 
need to send the server to Gateway for service. If you 
return your server in different packaging, your warranty 
may be voided.