Gateway 920 Manuale Utente

Pagina di 122
17
Caring for your server
www.gateway.com
Cleaning tips
Always turn off your server and other peripheral devices before cleaning 
any components.
Use a damp, lint-free cloth to clean your server and other parts of your 
server system. Do not use abrasive or solvent cleaners because they can 
damage the finish on components.
Keep the cooling vents free of dust. With your server turned off and 
unplugged, brush the dust away from the vents with a damp cloth, but 
be careful not to drip any water into the vents.
Cleaning the keyboard
You should clean the keyboard occasionally by using an aerosol can of air with 
a narrow, straw-like extension to remove dust and lint trapped under the keys.
If you spill liquid on the keyboard, turn off your server and turn the keyboard 
upside down to let the liquid drain. Let the keyboard dry completely before 
trying to use it again. If the keyboard does not work after it dries, you may 
need to replace it. Keyboard damage resulting from spilled liquids is not covered 
by your warranty.
Cleaning the screen
If your computer screen is a flat panel display, use only a damp, soft cloth to 
clean it. Never spray water directly onto the screen.
- OR -
If your computer screen is not a flat panel display, use a soft cloth dampened 
with glass cleaner to clean the screen. Never spray cleaner directly onto the 
screen.
Warning
When you shut down your server, the power turns off, but 
some electrical current still flows through your server. To 
avoid possible injury from electrical shock, unplug the 
power cord and all other cables connected to the server.
Warning
The computer screen is made of specially coated glass 
and can be scratched or damaged by abrasive or 
ammonia-based glass cleaners.