Gateway 920 Manuale Utente
45
Replacing the power supply
www.gateway.com
Replacing the power supply
To replace the power supply:
1
Follow the instructions in
2
Follow the instructions in
.
3
Disconnect the power supply cables from all components, noting their
locations and orientation. (You will reconnect the cables after you install
the new power supply.)
locations and orientation. (You will reconnect the cables after you install
the new power supply.)
4
Pull the power supply retention clip away from the power supply.
Warning
The power supply in this server contains no
user-serviceable parts. Only a qualified computer
technician should service the power supply.
user-serviceable parts. Only a qualified computer
technician should service the power supply.
Your server comes with a 3-wire AC power cord fitted with
the correct plug style for your region. If this plug does not
match the connector on your UPS or wall outlet, do not
attempt to modify the plug in any way. Use a UPS or wall
outlet that is appropriate for the supplied AC power cord.
the correct plug style for your region. If this plug does not
match the connector on your UPS or wall outlet, do not
attempt to modify the plug in any way. Use a UPS or wall
outlet that is appropriate for the supplied AC power cord.