Gateway 920 Manuale Utente
52
Chapter 4: Installing Components
www.gateway.com
Replacing the CMOS battery
If the server clock does not keep time or the settings in the BIOS Setup utility
are not saved when you turn off the server, replace the CMOS battery with an
equivalent battery.
are not saved when you turn off the server, replace the CMOS battery with an
equivalent battery.
To replace the battery:
1
Print the appendix for
in this guide.
2
Restart your server.
3
Press F2 when the Gateway logo screen appears during startup. The BIOS
Setup utility opens.
Setup utility opens.
4
Record the BIOS settings on your printout, then close the utility.
5
Turn off your server, then follow the instructions in
6
Follow the instructions in
.
7
Locate the old battery on the system board and note its orientation. You
will need to install the new battery the same way.
will need to install the new battery the same way.
Warning
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries following the manufacturer
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries following the manufacturer
’s instructions.
Battery