Gateway 920 Manuale Utente
59
Resetting the BIOS
www.gateway.com
Resetting the BIOS
The Reset BIOS jumper on the system board lets you return all BIOS settings
to the factory defaults.
to the factory defaults.
To reset the BIOS:
1
Print the appendix for
in this guide.
2
Restart your server.
3
Press F2 when the Gateway logo screen appears during startup. The BIOS
Setup utility opens.
Setup utility opens.
4
Record any custom BIOS settings on your printout.
5
Follow the instructions in
6
Turn off the server, then disconnect the power cord and all other cables
connected to the server.
connected to the server.
7
Remove the side panel. For more information, see
.
8
Place the jumper across pins 3-4 of jumper J13.
Warning
Moving the jumper while the power is on can damage your
server. Always turn off the server and unplug the power
cord and all other cables before changing the jumper.
server. Always turn off the server and unplug the power
cord and all other cables before changing the jumper.
Jumper pins 3-4