Fujitsu RX900 S1 Manuale Utente
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
RX900 S1
Maintenance Manual
87
Hard disk and solid state drives
6.3.3
Unlocking the HDD/SSD module
Figure 38: Unlocking the 2.5-inch HDD/SSD module
Ê
Release the locking mechanism as follows:
1. Press the two green tabs of the locking lever together (1).
2. Push the handle of the HDD/SSD module fully in the direction of the
arrow (2). The HDD/SSD module is now unlocked.
6.3.4
Removing the HDD/SSD module
Ê
Pull the HDD/SSD module out a few centimeters.
Ê
Wait for at least 60 seconds.
I
This period is necessary for the RAID controller to recognize that an
HDD/SSD module has been removed and for the hard disk drive to
come to a stop.
HDD/SSD module has been removed and for the hard disk drive to
come to a stop.
Ê
Pull the HDD/SSD module out completely.
2
1