Fujitsu TX200 Manuale Utente
120
Chapter 4 Manual OS Installation
2. When the "Please insert the disk labeled Manufacturer-supplied hardware support
disk into Drive A:" message appears, insert the driver disk created from the
ServerStart CD-ROM and press the [Enter] key.
The following message appears.
3. Select the item appropriate for the card used in the server and press the [Enter]
key.
• For a RAID card
• For an onboard SCSI controller card
4. When the following message appears, press the [S] key.
5. Follow the instructions in the window to perform installation.
When a message prompting you to insert a floppy disk appears, insert the proper
driver disk and press the [Enter] key.
5
When a Fiber Channel Controller (PG-FC106) is installed, install the fiber
channel card driver.
1. When the following message appears, press the [S] key.
2. When the "Please insert the disk labeled Manufacturer-supplied hardware support
disk into Drive A:" message appears, insert the fiber channel card driver disk
created from the ServerStart CD-ROM and press the [Enter] key.
The following message appears.
3. Select the following item and press the [Enter] key.
You have chosen to configure a SCSI Adapter for use with
Windows, using a device support disk provided by an
adapter manufacturer.
Select the SCSI Adapter you want from the following list,
or press ESC to return to the
previous screen.
LSI MEGARAID Products for Windows 2003 (x86)
LSI Logic PCI SCSI/FC MPI Miniport Driver
The driver you provided seems to be newer than the Win-
dows default driver.
To specify additional SCSI adapters, CD-ROM drives,
or special disk controllers for use with Windows,
including those for which you have a device
support disk from a mass storage device
manufacturer, press S.
You have chosen to configure a SCSI Adapter for use with
Windows, using a device support disk provided by an
adapter manufacturer.
Select the SCSI Adapter you want from the following list,
or press ESC to returnto the
previous screen.
Emulex LP9802 PCI-Fiber Channel HBA