Fujitsu TX200 Manuale Utente
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
221
PRIMERGY TX200 S2 User’s Guide
Inst
a
llin
g hardw
g hardw
are option
s
7
4
Remove the two dummy units.
Pull the dummy unit out slowly towards you, keeping the latches on the 5-inch storage bay rails
(on both sides) pressed inward.
Be sure to keep the removed dummy units for later use.
5
Detach the 5-inch storage bay rails from the removed dummy unit.
Remove eight screws that fix the 5-inch storage bay rails to detach.
6
Attach the removed 5-inch storage bay rails to the internal hard disk unit bay
conversion kit to be added.
Of the eight screws removed from the dummy unit when the 5-inch storage bay rails were
detached, use four metric threads to install the internal device.
Latches
Metric thread
Metric thread
Inch thread
Inch thread
* Also secure the opposite side in the same way.