Fujitsu TX200 Manuale Utente
256
Chapter 8 Configuring Hardware and Utilities
8.3.5 Adapter Properties
Detailed configuration information of SCSI adapters on the SCSI bus is set. Press the [F2] key from the
[Main] menu window, select [Adapter] and press the [Enter] key to display the window.
table: Items on the Adapter Properties Window
Item
Setting
Description
Host SCSI ID
7 (Fixed parameter)
Specifies the SCSI ID of the SCSI controller.
SCSI Bus Scan Order
Low to High (0..Max)
(Fixed parameter)
(Fixed parameter)
Specifies the SCSI bus scan order during the
startup.
startup.
Removable Media Support
None (Fixed parameter)
Sets whether or not the SCSI BIOS supports
removable disk units such as MO drives.
removable disk units such as MO drives.
CHS Mapping
SCSI Plug and Play
Mapping (Fixed parameter)
Mapping (Fixed parameter)
Specifies the disk mapping method.
Spinup Delay (Secs)
• 2 (at the time of
purchase)
• 1–15
Specifies the interval between a server startup and
the start of disk rotation.
the start of disk rotation.
Secondary Cluster Server
No (Fixed parameter)
Sets whether to enable or disable the secondary
cluster server.
cluster server.
Termination Control
Auto (Fixed parameter)
Sets whether to enable or disable the terminator on
the system board.
the system board.
Restore Defaults
Reads default values for the controller.
LSI Logic MPT SCSI Setup Utility Version MPT BIOS-IME-n.nn.nn
Adapter Properties
Adapter PCI DEV/
Bus Func
Bus Func
1020/1030 2 40
1020/1030 2 41
1020/1030 2 41
<Device Properties>
<RAID Properties>
<RAID Properties>
<Synchronize Whole Mirror>
F1 =HELP
Esc=Abort/Exit
ArrowKeys=Select Item
Home/End=Select Item
-/+ =Change [Item]
Enter=Excute <Item>
Enter=Excute <Item>
Host SCSI ID
SCSI Bus Scan Order
Removable Media Support
CHS Mapping
Spinup Delay(Secs)
Secondary Cluster Server
Termination Control
SCSI Bus Scan Order
Removable Media Support
CHS Mapping
Spinup Delay(Secs)
Secondary Cluster Server
Termination Control
<Restore Defaults>
[ 7]
[Low to High(0..Max)]
[None]
[SCSI Plug and Play Mapping]
[ 2]
[No]
[Auto]
[Low to High(0..Max)]
[None]
[SCSI Plug and Play Mapping]
[ 2]
[No]
[Auto]