Fujitsu TX200 Manuale Utente
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
225
PRIMERGY TX200 S2 User’s Guide
Inst
a
llin
g hardw
g hardw
are option
s
7
7.8 Installing a Parallel Port
When a parallel port is necessary, install an optional parallel port.
For the parallel port location, refer to "1.3.2 Server (Rear View)" (pg.25).
7.8.1 How to Install a Parallel Port
1
Turn off the server and connected devices, and unplug all power cables from
the outlet.
2
Remove the side cover.
3
Touch a metal part of the server to discharge static electricity.
4
Remove the ventilation system cover.
Release the latch on the ventilation system cover and lift it up to remove.
• When installing or removing a parallel port, turn off the server, all peripheral
devices, and any other connected devices. Also unplug all power cables from
the outlet.
Failure to do so can cause electric shock.
• Touch only the specified part of the printed circuit board.
Failure to do so could cause injury and also damage the server.
• Be careful to avoid injury when handling the parallel port connector panel
removed from the rear of the server.
Ventilation
system cover
system cover
Latch