Fujitsu N800 Manuale Utente

U41243-J-Z156-1-76

 35

Preparation for use and operation

The internal SCSI drives are located on the front of the server. The status of 
each SCSI drive is indicated by two LEDs (see table 24 on page 91).

The CD-ROM drive is located in the drive cage in the bay for externally acces-
sible drives on the front of the server. The CD-ROM drive is equipped with the 
following controls and indicators:

The floppy disk drive is located above the CD-ROM drive. The floppy disk drive 
is equipped with the following controls and indicators:

The power supplies can be accessed from the back of the server. The status of 
each power supply is indicated by three LEDs (see table 25 on page 95).

Each hot-plug PCI slot is equipped with two pairs of LEDs (hot-plug indicators) 
which indicate the current status of the slot (see table 26 on page 100). One pair 
of LEDs is visible on the back of the server from the outside. The other pair is 
located inside the server in near the slot with the PCI hot-plug locking 
mechanism.

Open/close button:

When pressed briefly (<1 second), this button opens 
or closes the CD-ROM tray.

Power-on indicator:

Lights up green when the CD-ROM drive is in use.

Volume control:

Adjusts the volume of the headphones or speakers.

Power-on indicator:

Lights up green when the floppy disk drive is in use.

Eject button:

Pressing briefly on this button ejects the floppy disk.