Perle Systems SCS8C DC Manuale Utente

 219

Adding/Editing Users

The amount of time, in seconds, before the IOLAN forcibly closes a user’s 

session (connection). The default value is 

 (zero), meaning that the session 

timer will not expire (the session is open permanently, or until the user logs 

out). The 

 will override all other 

 parameters.

Range: 0-4294967
Default: 0

When enabled, enter a phone number for the IOLAN to call the user back (the 

 parameter is unrelated to the 

profile

 parameter).

Note: the IOLAN will allow callback only when a user is authenticated. If the 

protocol over the link does not provide authentication, there will be no 
callback. Therefore, when the 

profile is set to 

, you must use either 

 or 

, because these protocols provide 

authentication. 
The IOLAN supports another type of callback, 

, which is 

configurable when the 

profile is set to 

. 

Default: Disabled

The phone number the IOLAN will dial to callback the user (you must have set 

 enabled). 

Restrictions: Enter the number without spaces. 

You can specify whether a user will use 

 or 

 as the 

language that appears in the Menu or CLI. The IOLAN supports one custom 

language that must be downloaded to the IOLAN.
Default: English

 for more information about Custom Languages.

The prefix that a user types to control the current session.
Data Options:

z

 

—To switch from one session to another, press 

 (Ctrl-a) and 

then the required session number. For example, 

 would switch you to 

session 2. Pressing 

will return you to the IOLAN Menu.

z

—Display the next session. The current session will remain active. 

The lowest numbered active session will be displayed.

z

—Display the previous session. The current session will remain 

active. The highest numbered active session will be displayed.

z

—To exit a session and return to the IOLAN. You will be returned to 

the menu. The session will be left running.

z

—(Lowercase L) Locks the serial port until the user unlocks it. The 

user is prompted for a password (any password, excluding spaces) and the 

serial port is locked. The user must retype the password to unlock the 

serial port.

z

—When you switch from a session back to the Menu, the screen may 

not be redrawn correctly. If this happens, use this command to redraw it 

properly. This is always 

, regardless of the 

.

The 

 value overrides the 

 value. 

You can use the 

 keys to lock a serial port only when the serial 

port’s 

 parameter is enabled.

Default: Hex 01 (Ctrl-a or ^a)