Motion Computing AB52242 Manuale Utente

52

Chapter 

2  Using Your Motion Tablet Client

There are three technologies available in the Tablet Client for wireless 
networking connections. 

• Wi-Fi (802.11) 
• Bluetooth
• Infrared 

IMPORTANT: Since wireless set ups differ widely, the 

information presented here is general and may not cover all 

the steps required for your wireless configuration. For more 

information about wireless networks, you may need to contact 

your System Administrator. Or, go to Start > Help and 

Support and search for wireless help from Microsoft.

Although wireless access is available in public areas, your ability to use the 
wireless access point depends on the following conditions:

• Distance from the access point
• Ability to connect to the access point
• Service rights to it (which may require an account fee, user name, pass-

word, an/or network set up through an administrator) 

• The access point is not broadcasting a network name (Check your secu-

rity settings, the SSID may not be broadcasting)

• The security settings may not be configured properly for wireless net-

working.

WARNING: FAA regulations require that you disable 

any wireless connection when traveling by air. If the 

Wireless LED on the front of the Tablet Client is off, 

internal wireless communications are disabled.

1. Open the Motion Dashboard by pressing the Dashboard button on 

the Tablet Client or by selecting Start > All Programs > Motion 

Resources > Motion Dashboard. 

2. Make sure that Enable Internal 802.11 Wireless Radio is checked. 
3. Under Wireless on the Motion Dashboard, tap Properties.
4. In the Wireless Network Connection Properties window, tap the 

Wireless Networks tab.

5. In the Wireless Networks window, tap View Wireless Networks to 

see a list of available networks.