IBM X220I Manuale Utente
Table 27. Removal steps of the hinge
1
1
Step
Screw (quantity)
Color
Torque
1
M2.5 × 6 mm, wafer-head, nylon-coated (2)
Black
0.392 Nm
(4 kgfcm)
(4 kgfcm)
Detach the hinge from the LCD rear cover, and gently pull the cables out through the guide hole in the hinge. Pull
them all at once. As you pull them, be sure not to subject them to any tension, which could cause them to be
damaged by the cable guides, or a wire to be broken.
them all at once. As you pull them, be sure not to subject them to any tension, which could cause them to be
damaged by the cable guides, or a wire to be broken.
3
3
2
2
2040 LCD panel and LCD cable
For access, remove these FRUs in order:
•
•
•
•
•
•
•
•
•
•
Chapter 8
.
Removing and replacing a FRU
99