Cisco Systems Servers Manuale Utente

This procedure allows you to enable the Cisco IOS/PIX RADIUS VSA. Selecting 
this attribute displays an entry field under User Setup and/or Group Setup in 
which any TACACS+ commands can be entered to fully leverage TACACS+ in 
a RADIUS environment. 

If the Per-user TACACS+/RADIUS Attributes check box in Interface 
Configuration: Advanced Options is selected, a User check box appears 
alongside the Group check box for each attribute.

To set protocol configuration options for the Cisco RADIUS attribute follow 
these steps:

Click Interface Configuration.

Click RADIUS (Cisco IOS/PIX).

Result: The RADIUS (Cisco IOS/PIX) page appears.

Select the check box for either User or Group, or both, next to attribute number 
26, the VSA for Cisco. 

Click Submit at the bottom of the page.

Result: According to your selections, the attribute for the Cisco RADIUS VSA 
appears on the User Setup or Group Setup pages, or both, as a configurable option 
with a field in which you can enter TACACS+ commands.

This procedure enables you to hide or display RADIUS (Ascend) attributes for 
configuration from other portions of the Cisco Secure ACS HTML interface.