Cisco Systems Servers Manuale Utente

This chapter details concepts and procedures for configuring the 
Cisco Secure ACS network and establishing a distributed system.

The appearance of the opening page you see when you click Network 
Configuration differs according to the network configuration selections you’ve 
made in the Interface Configuration section. The four tables that may appear in 
this section are as follows:

AAA Clients—This table lists each AAA client that is configured on the 
network, together with its IP address and associated protocol. 

If you are using network device groups (NDGs), this table does not appear on 
the initial page, but is accessed through the Network Device Group table. For 
more information about this interface configuration, see the 

.

AAA Servers—This table lists each AAA server that is configured on the 
network together with its IP Address and associated type.

This table does not appear unless you have enabled the Distributed System 
Settings feature in Interface Configuration. 

If you are using NDGs, this table does not appear on the initial page, but is 
accessed through the Network Device Groups table. For more information 
about this interface configuration, see the