Cisco Systems Servers Manuale Utente

the “(Default)” entry is the local Cisco Secure ACS server. It can sometimes be 
easier to define strings that match authentication requests to be processed locally 
rather than defining strings that match authentication requests to be processed 
remotely. In such a case, associating the “(Default)” entry with a remote AAA 
server permits you to configure your Proxy Distribution Table with the more 
easily written entries.

To create a Proxy Distribution Table entry, follow these steps:

In the navigation bar, click Network Configuration.

Result: The Network Configuration page opens.

Below the Proxy Distribution Table, click Add Entry. 

If the Proxy Distribution Table does not appear, you must enable it by 
clicking Interface Configuration, clicking Advanced Options, and 
then selecting the Distributed System Settings check box.

In the Character String box, type the string of characters, including the delimiter 
to forward on when users dial in to be authenticated. For example,.uk.

Angle brackets (< and >) cannot be used.

From the Position list, select Prefix if the character string you typed appears at 
the beginning of the username or Suffix if the character string appears at the end 
of the username.

From the Strip list, select Yes if the character string you entered is to be stripped 
off the username, or select No if it is to be left intact.

In the AAA Servers column, select the AAA server you want to use for proxy. 
Click —> (right arrow button) to move it to the Forward To column.