Cisco Systems Servers Manuale Utente

6-5

Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide

78-13751-01, Version 3.0

Chapter 6 Setting Up and Managing User Groups

Common User Group Settings

Setting Default Time of Day Access for a User Group

Note

If this feature does not appear, click Interface Configuration, click
Advanced Options. Then select the Default Time-of-Day / Day-of-Week
Specification check box.

To define the times during which users in a particular group are allowed, or not
allowed access, follow these steps:

Step 1

In the navigation bar, click Group Setup.

Result: The Group Setup Select page opens.

Step 2

From the Group list, select a group, and then click Edit Settings.

Result: The Group Settings page displays the name of the group at its top.

Step 3

In the Default Time-of-Day Access Settings table, select the Set as default
Access Times check box.

Note

You must select the Set as default Access Times check box, to limit
access based on time or day.

Result: Times at which the system allows access are highlighted in green on the
day and hour matrix.

Note

The default sets accessibility during all hours.

Step 4

In the day and hour matrix, click the times at which you do not want to allow
access to members of this group.

Tip

Clicking times of day on the graph deselects those times; clicking again
reselects them.
At any time, you can click Clear All to clear all hours, or you can click Set
All to select all hours.