Cisco Systems Servers Manuale Utente
Chapter 7 Setting Up and Managing User Accounts
Advanced User Authentication Settings
7-36
Cisco Secure ACS 3.0 for Windows 2000/NT Servers User Guide
78-13751-01, Version 3.0
Caution
Use an outbound password only if you are familiar with the use of a TACACS+
SendAuth/OutBound password.
SendAuth/OutBound password.
To set a TACACS+ outbound password for a user, follow these steps:
Step 1
Perform Steps 1 through 3 of the
Result: The User Setup Edit page opens. The username being added or edited
appears at the top of the page.
appears at the top of the page.
Step 2
Type and retype to confirm a TACACS+ outbound password for this user.
Step 3
Do one of the following:
a.
If you are finished configuring the user account options, click Submit to
record the options.
record the options.
b.
To continue to specify the user account options, perform other procedures in
this chapter, as applicable.
this chapter, as applicable.
RADIUS Attributes
You can configure user attributes for RADIUS authentication either generally, at
the IETF level, or for vendor-specific attributes (VSAs) on a vendor-by-vendor
basis. For general attributes, see the
the IETF level, or for vendor-specific attributes (VSAs) on a vendor-by-vendor
basis. For general attributes, see the
. Cisco Secure ACS ships with many popular VSAs
already loaded and available to configure and apply. For information about
creating additional, custom RADIUS VSAs, see the
creating additional, custom RADIUS VSAs, see the
.
To configure the VSA for one of the RADIUS network device vendors supported
by Cisco Secure ACS, refer to the appropriate procedure as follows:
by Cisco Secure ACS, refer to the appropriate procedure as follows:
•
•
•