Cisco Systems Servers Manuale Utente

 lists the action codes for initializing and modifying AAA 

client access filters. AAA client access filters control Telnet access to a AAA 
client. Dial access filters control access by dial-up users.

 Transactions using these codes affect the configuration displayed in the User 
Setup and Group Setup sections of the HTML interface. For more information 
about the User Setup section, see 

 For more information about the Group Setup section, see 

271

SET_DCS_NDG_
MAP

UN|GN,VN,
V1,V2

When the assignment type specified by a 270 action 
code is ndg, use this action code to map between the 
device command set and the NDG.

VN defines the service. Valid service types are:

shell—Cisco IOS shell command authorization.

pixshell—Cisco PIX command authorization.

If additional DCS types have been added to your 
Cisco Secure ACS, you can find the valid value in the  
Interface Configuration page for TACACS+ (Cisco 
IOS). The valid values appear in parentheses after the 
service title, such as 

PIX Shell (pixshell)

.

V1 defines the name of the NDG. Use the name of the 
NDG as it appears in the HTML interface. For 
example, if you have configured an NDG named "East 
Coast NASes" and want to use action 271 to apply a 
DCS to that NDG, V1 should be "East Coast NASes".

V2 defines the name of the DCS. Use the name of the 
DCS as it appears in the HTML interface. For 
example, if you have configured a DCS named "Tier2 
PIX Admin DCS" and want to use action 271 to apply 
it to an NDG, V2 should be "Tier2 PIX Admin DCS".