Fujitsu fi-6670A Guida Utente

Chapter 1 Scanner Overview

31

This section describes how to turn the scanner ON and OFF.

The following shows the procedure for turning the scanner 
ON.

Press the "I" side of the Main Power Switch.

Press the [Power] button on the Operator Panel.

⇒

The scanner is turned on, and the Power LED lights in green.

Note that, while the scanner is being initialized, the Function Number 
Display changes as follows: "8" 

D

 "P" 

D

 "1", where "1" means the 

scanner is in the Ready Status.

The following shows the procedure for turning the scanner 
OFF.

Press the [Power] button on the Operator Panel for more 
than 2 seconds.

⇒

The power is turned off and the Power LED goes off.

！

！

！

For a SCSI cable connection, be sure to turn on your computer 
AFTER turning on the scanner, and making sure number "1" 
indicates on the Function Number Display.

Check

Function

Send to

Power

Scan / Stop

Check

Function

Send to

Scan / Stop

Power

[Power] Button

ADF type

Flatbed type

Use the Main Power Switch to turn the power ON if the 
Operator Panel power switch has been disabled. 
For details, refer to 

.

• If you will not use the scanner for a long time, press 

the "O" side of the Main Power Switch to turn the 
power OFF. Then, unplug the scanner from the power 
outlet.

• Use the Main Power Switch to turn the power OFF if 

the Operator Panel power switch has been disabled.

For details, refer to 

.