Fujitsu M3096EX Manuale Utente
5 – 6
(e) Remove the bearing B.
(f) Mount the new pick roller in reverse
order of removal.
Bearing B
Figure 5.7
Remove the Pick Roller
NOTICE: When mounting the Guide A, note that the hooks of the retaining spring are
not pressed by the Guide A. (See figure bellow)
Guide A
Retaining spring
(c) Pinch the retaining spring and slide
it toward the roller. Free bearing A
from the bracket by sliding it
toward the roller.
from the bracket by sliding it
toward the roller.
Bearing A
Retaining spring
Figure 5.5
Move the Retaining spring
(d) Slide the pick roller shaft in the
direction of arrow B and remove
the shaft from bearing B. The
roller shaft can then be lifted and
removed as shown in Figure 5.7.
the shaft from bearing B. The
roller shaft can then be lifted and
removed as shown in Figure 5.7.
A
B
Bearing A
Figure 5.6
Slide the Pick Roller